Simple PhotoCell Timing System
(S.P.T.S.)

CHITI - Installation Helper Software

Click for Screen Image

Features

• The one and only program you need to help you install SPTS. Don't jump the gun and try running DINO or LEMANS etc until you get your system working with CHITI. If it works in CHITI, the rest is as simple as pie.
• CHITI's function is to simplify the installation process, help you understand how PhotoCells work and aid in the fine tuning of your system.
• Once you get things working, you won't need to use CHITI again.
• It's a stand-alone program. You don't need to have PhotoCells hooked up, you can run it on any machine and it will give you the status of each pin in all of your LPT ports.
• You can test the functioning of CHITI by running it and powering up a printer or other LPT device. Any change in Pin Status will be immediately obvious.
• Includes a Theory of Operation screen explaining how PCells work.
• Includes a Basic Troubleshooting Guide.
• Includes DB25 Pinouts Graphic (done at great expense)
• Shows Pins and Lane assignments.
• Gives the status of all three LPT ports (LPT1, LPT2, LPT3) so you can determine which port you are hooked up to.
• Includes Instructions for tuning PCells.
• Runs a continuous detection loop, so the instant a Pin Status changes, you see it on the screen.
• Wow... all this and it doesn't cost a cent!!
• Included as part of SMI's "Basic Software", available free to anyone who requests it.
• Released way back in 1996 (It's the first program we wrote when we were trying to figure out how PCells worked).