|Tip of the Week|
|These are my "personal" tips(IE:haven't knocked them off from anyone else.)
If you like my ideas, right on : )
You sent in any ideas lately??? Weed World
If not, shut up!!!
|I call this one "easy resin"
***This only works with "standard" strate style bong***
Go to the craft store and purchase colored plastic film sheets (aprox. $5 at Micheals get five colors in one pack,Thicker sheets work better)
To set up easy resin
Pick a color of film, Wipe film with damp cloth, Roll film damp side out, Insert film into bong, Voila!!
You have a "new" color of bong AND it's easy to get at the resin.
Slide film out of bong, Lay flat, Scrape surface. Voila!!! Easy resin!!
1 Mettalic Gold sheet of film
1 Mettalic Green sheet of film
Cut leaf shape/s into GOLD sheet. Place Gold sheet over green sheet, Insert, Voila!!
Now you have an awesome Gold bong with a Mettalic Green leaf/ves.
| Mixed tips (Oil And Joints)
#1- When making an oil paper.Don't heat your oil and drop it on the paper(takes time,is messy,loss of THC)Instead just glob it on the paper. Squish the paper togeather. Hold paper by the ends and gentley slid back and forth over a light bulb( must be on) for a few seconds. This will gently heat the oil and it will spread it out evenly with no mess.
#2- When rolling a joint with pot. Make a "hole" or "divit" in the center of the pot pile on your paper(instead of placeing the pot flat and even on the paper). This will make two "large" mounds under your thumbs. Roll your joint now. It should come out perfectly strait. (great trick for female "beginner" rollers)
#3- To "boost" flavor of joint. Always burn a paper before rolling. The amount of ash(gray,black or white) will show you how much flavor your losing to "paper" smoke. Try to find a paper that when burnt leaves a fluffy white ash. You would be amazed at how much more "flavor/scent" your joints have when rolled with a white ash paper.
#4- Sunlight dish soap removes oil stains from clothing or hands : )
#5- To scrap that "crusty & dry" oil off your dish/pan (desperate for a hoot scraping the pan kinda thing) put a SMALL amount of water(few drops) in the dish (ya ,ya I know, Water are you nuts?) with the water in the dish, begin scraping (comes off really easy eh!!) after you have scraped the dish. Push all oil/resin to one side of dish, pour water drops out the other side of the dish. And your done. With out all the hasle!!
#6- Use my instant oil recipe. Makes in under ten mintues. clean fast simple. But most importantly you can't blow anything up (or start fires) because you don't need to apply any heat.
|Last Weeks Tip|